---
title: Capture Modes
slug: nexus/capture-modes
createdAt: 2026-11-20T15:06:33.763Z
---

The `Mode` menu in the Trigger tool sets what DT Nexus does when you start a capture, whether you click `Capture`, press a foot pedal plugged into a DT Stellar, or use the DT Nexus Capture shortcut (⌘K). To step through the modes from the keyboard, press ⌘⇧K.

DT Nexus lists only the modes that your lights, camera, and license support, so the list changes as you connect and disconnect equipment. If the selected mode stops being available, for example because its light was disconnected, DT Nexus switches the Trigger tool back to `White`.

## Modes

| Mode              | Offered when                                                                                  | Use it for                                      |
| ----------------- | --------------------------------------------------------------------------------------------- | ----------------------------------------------- |
| `White`           | Always                                                                                        | Ordinary capture under white light.             |
| `Fusion`          | An original DT Stellar (with Fusion) is connected and your license includes DT Fusion Capture | DT Fusion capture.                              |
| `Color Neg`       | A Stellar RGBW is connected                                                                   | Color negative film.                            |
| `B+W Film (Blue)` | An achromatic camera and an original DT Stellar or a Stellar RGBW are connected               | Black and white film with an achromatic camera. |
| `B+W Film (RGB)`  | A color camera and a Stellar RGBW are connected                                               | Black and white film with a color camera.       |
| `Focus Stack`     | A Phase One iXH is connected                                                                  | A focus sweep.                                  |
| `Sequencer`       | Your license includes the Sequencer                                                           | Running the loaded sequence.                    |

An achromatic camera is one whose name in Capture One includes "Achromatic" (or "Achro"). Any other connected camera counts as a color camera.

### White

The standard mode. With DT Stellar lights in Flash mode, the lights go to their capture power for the exposure. With no lights connected, `White` captures with the camera alone.

### Fusion

Captures a DT Fusion image. See [Fusion Capture](https://docs.digitaltransitions.com/nexus/fusion-capture).

### Color Neg

Captures color negative film with a Color Negative Film Calibration. Until a calibration is selected, the Trigger tool shows "Color Neg Preset needed for capture". See [Capturing](https://docs.digitaltransitions.com/nexus/capturing).

### B+W Film (Blue)

"Blue-Only illumination for highest resolution imaging of monochrome transmissive material with an achromatic camera." Choose this for black and white film, glass plates, and other monochrome transmissive material when you are using an achromatic camera.

:::hint{type="info"}
In DT Nexus 1.2 this mode was called `Blue` and was offered with any DT Stellar. It is now `B+W Film (Blue)` and is offered only with an achromatic camera. With a color camera, use `B+W Film (RGB)`.
:::

### B+W Film (RGB)

"Narrow RGB illumination for higher resolution imaging of monochrome transmissive material with a standard color camera." The red, green, and blue channels of the Stellar RGBW fire together. Choose this for monochrome transmissive material when your camera is a color camera.

### Focus Stack

Runs a focus sweep set up in the Focus Stack Capture Control tool. See [Focus Stacking](https://docs.digitaltransitions.com/nexus/focus-stacking).

### Sequencer

Starts the sequence loaded in the Sequencer, or continues it when it is waiting at a Wait for Trigger step. See [Running a Sequence](https://docs.digitaltransitions.com/nexus/running-a-sequence).

A Capture action inside a sequence has its own `Mode` setting, which also offers `Direct` (no lights). See [Building a Sequence](https://docs.digitaltransitions.com/nexus/building-a-sequence).

## If a Capture Is Refused

If the equipment no longer matches the selected mode, DT Nexus does not take the capture and tells you why, for example:

- "B+W Film (Blue) requires an achromatic camera."
- "B+W Film (RGB) requires a non-achromatic color camera."
- "B+W Film (RGB) requires a connected Stellar RGBW light."
- "B+W Film (Blue) requires a connected Stellar or Stellar RGBW light."

DT Nexus also refuses a capture through the lights while a light in your light groups is disconnected. See [Adding / Removing Lights](https://docs.digitaltransitions.com/nexus/adding-removing-lights).

## Related Settings

- **Trigger Source** tells the lights whether a camera or a foot switch is plugged into their Sync input. See [Triggering Capture with DT Stellar Lights](https://docs.digitaltransitions.com/nexus/triggering-capture-with-dt-stellar-lights).
- **Universal Capture** lets the Capture shortcut start a DT Nexus capture while another app, such as Capture One, is in front. See [Universal Capture](https://docs.digitaltransitions.com/nexus/universal-capture).
- **Screen Blackout** covers your screens with black during each DT Nexus capture. See [Screen Blackout](https://docs.digitaltransitions.com/nexus/screen-blackout).
- Captures and sequences can also be started from your own scripts. See [AppleScript](https://docs.digitaltransitions.com/nexus/applescript).
