Setting Continuous Light Output
Steps
Ensure the mode switch is set to “Standalone” and the unit is powered.
When powered on the Stellar enters the Continuous Light: Coarse Adjustment setting. The Indicator Ring turns light blue, every third LED is yellow indicating one stop of light.
Rotate the Control Dial clockwise to increase power by ⅓ stop increments and counter-clockwise to decrease power by ⅓ stop increments across a seven stop range.
Continuous light output has a maximum output setting of 10.0, to access the last stop of power (a setting of 11.0), Flash function is needed.
Press the Control Dial once to enter the Continuous Light: Fine Adjustment setting. The Indicator Ring turns yellow.
Rotate the Control Dial clockwise and counter clockwise to increase and decrease power respectively by 1/24 stop increments. While in fine adjustment, a maximum range of +/- ⅓ stop is possible.
To exit the fine adjustment setting, press the Control Dial once or wait three seconds to return to the previous menu.
If the coarse adjustment setting is changed after a fine adjustment has been made, the fine adjustment setting will reset, removing any 1/24th of a stop adjustments.