Setting Flash Duration

when using a photographic flash with a camera the entire power of the light is nearly instantly dispatched and very short shutter speeds can be used with dt stellar the power is increased to a higher power during the capture, and a longer exposure is typical in some cases, such as shooting oversized material on a wall mount or large easel several seconds of exposure time may be required stellar allows the user to increase the length of its flash to ensure it’s on the entire time the camera is exposing steps ensure the mode switch is set to “standalone” and the unit is powered on when powered on the stellar enters the continuous light coarse adjustment setting the indicator ring turns light blue, every third led is yellow indicating one stop of light press the control dial twice to enter the flash light coarse adjustment setting the indicator dial turns pink, every third led is yellow indicating 1 stop of light press and hold the control dial for four seconds to enter the flash duration setting the indicator turns green rotate the control dial clockwise (to increase) or counter clockwise (to decrease) the length of the flash the periods represented by each led are 0 5, 1, 2, 4, 8, 15, 30, 60 seconds to exit the flash duration setting, press the control dial once or wait three seconds to return to the previous menu