Universal Capture
Normally the DT Nexus Capture shortcut (⌘K) only works while DT Nexus is the app in front. Universal Capture lets the same shortcut start a DT Nexus capture from any app, for example while you are checking focus or metadata in Capture One.
Every press goes through DT Nexus, exactly as if you had clicked Capture in the Trigger tool. It uses the current capture mode, light settings, and loaded sequence, and Screen Blackout applies if it is on. Universal Capture is meant for foot pedals and keypads that send ⌘K.
Universal Capture is off by default.
Requirements
- macOS
- Capture One using the DT Nexus Compatible keyboard shortcut set, so that Capture One's own ⌘K Capture command is removed
- Permission for DT Nexus under System Settings > Privacy & Security > Accessibility
Turning On Universal Capture
Choose Help > Capture One Shortcut Compatibility... and click Switch to Compatible Set. Capture One is closed and reopened to apply the change.
This step is needed because Capture One's own ⌘K Capture command takes a picture without DT Nexus lighting, capture modes, or sequences. The compatible set removes it, along with the Speed Edit keys that conflict with Batch Crop Adjust, and keeps your other Capture One shortcuts. If Capture One already uses the compatible set, DT Nexus tells you so.
Open DT Nexus > Preferences and select Capture One. Under Capture Shortcut, tick Use the DT Nexus Capture shortcut from any app, then click OK.
If macOS asks, allow DT Nexus in System Settings > Privacy & Security > Accessibility. While it waits, DT Nexus shows "Allow Accessibility for Universal Capture". Universal Capture turns on as soon as you allow it. There is no need to tick the box again.
Choosing the Shortcut
Universal Capture uses the shortcut set for "Trigger a capture in Capture One" in Help > Customize Shortcuts..., which is ⌘K by default. If you change it, the new shortcut must use Command, or be a dedicated F13 to F35 key. Ordinary typing keys are refused, so that typing in another app cannot start a capture. The shortcut also cannot be one that Capture One uses for another command.
While DT Nexus itself is in front, the shortcut works as it always does.
Status Line
Below the checkbox, a status line shows whether Universal Capture can run. It updates while Preferences is open.
Status | What to do |
|---|---|
Ready: Capture One's direct ⌘K capture is disabled. | Nothing. Universal Capture can run. |
Setup required: Capture One still uses ⌘K. Run Help → Capture One Shortcut Compatibility before enabling universal capture. | Switch Capture One to the compatible set (step 1 above). |
macOS Accessibility permission will be requested when you save. | Click OK, then allow DT Nexus when macOS asks. |
Setup required: allow DT Nexus under Privacy & Security → Accessibility. | Allow DT Nexus in System Settings. |
Setup required: restart Capture One so it loads the updated shortcut set. | Quit and reopen Capture One. |
Setup required: DT Nexus cannot tell which Capture One application is running. Close the extra edition and try again. | Quit all but one copy of Capture One. |
Setup required: Capture One already uses the DT Nexus Capture shortcut for another command. Choose a different shortcut. | Choose another shortcut in Help > Customize Shortcuts.... |
Setup required: choose a DT Nexus Capture shortcut that uses Command or a dedicated F13–F35 key. | Change the shortcut as described above. |
Setup required: DT Nexus could not verify Capture One's shortcuts. | Run Help > Capture One Shortcut Compatibility... again. |
When Universal Capture Will Not Turn On
If DT Nexus cannot turn Universal Capture on, it clears the checkbox and shows "Universal Capture Not Enabled" with the reason, followed by "No capture shortcut was activated." Fix the cause shown, then tick the box again.
If Capture One's shortcuts change later so that it is no longer safe, for example because ⌘K is assigned to Capture One's Capture command again, DT Nexus stops listening for the shortcut outside DT Nexus. While Universal Capture is on and Capture One still owns ⌘K, the shortcut compatibility dialog appears even if you ticked Don't show this again.
If you switch Capture One's shortcuts while Universal Capture is on, DT Nexus may show "Universal Capture Still Off". Enable it again in Preferences > Capture One once Capture One has restarted.
See also Keyboard Shortcuts and Triggering Capture with DT Stellar Lights.